Skip to content

The proposal and sending it

Turn a signed-off quote into a branded proposal, download it as a PDF, and get it to your customer.

Who can use this: owners and estimators.

Open the proposal

  1. Sign off the quote.
  2. Tap Continue to proposal on the sign-off card, or Preview proposal at the top of the quote.

The first time, you'll see Writing your proposal while QuoteSite writes it from the signed-off quote. This takes a few seconds. After that it opens the saved version, with your edits.

The bar at the top has Back to quote, Download PDF, Mark as sent and, if you use it, Email to customer.

What's in it

From top to bottom:

  • Your logo, business name and contact details. Set these in Settings.
  • Prepared for: the customer and site address.
  • Proposal: the job reference, the date, and the date it's valid until. The valid-until date comes from Quote validity (days) in Settings.
  • A title, a greeting and a few short paragraphs.
  • What we'll do: a bulleted list of the work.
  • Your investment: the prices, shown the way you chose (see How prices show).
  • A closing box inviting the customer to go ahead, unless you've switched it off in Settings.
  • Your Terms & conditions, if you've added them in Settings.
  • A footer line with your insurance, guarantee and accreditations from Settings, word for word, plus your trading address, company number and VAT number if you've filled them in. QuoteSite doesn't write these itself.

Edit the wording

QuoteSite writes the wording, but it's your proposal. Read it through before it goes.

  1. Tap any text: the title, greeting, paragraphs, bullets, closing box or footer.
  2. Type your change.
  3. Tap away. It saves on its own, with a brief green outline.

In What we'll do:

  • Tap the cross next to a bullet to remove it.
  • Tap Add bullet to add one. Tap its "New item" text and the words after it to write your own.

If a change won't save, the box gets an amber outline and goes back to what it said before. Check your signal and try again.

If you've set your own closing words in Settings, they're used in the closing box and can't be edited here.

Changing prices

Prices can't be edited on the proposal. To change them:

  1. Tap Back to quote.
  2. Tap Unapprove & edit, make the change, and sign off again.
  3. Open the proposal again.

The prices update. The wording doesn't, so check it still matches, for example if you removed a piece of work.

How prices show

You choose this in Settings, and can change it for one quote under Proposal display on the quote before you sign off.

Detail level The customer sees
Full breakdown Every line with its price, under a subtotal for each group
Summary by group A subtotal for each group
Single price One total
Scope only No prices at all
VAT display The customer sees
Ex-VAT primary Prices without VAT, then a VAT line and the total
Inc-VAT only Prices with VAT included, and no separate VAT line
Inc-VAT primary Prices with VAT included, each with the ex-VAT figure underneath, and under the total how much of it is VAT (Includes VAT (20%))

If you're not VAT-registered, prices show without VAT and there's no VAT line.

Quantities column shows or hides quantities, such as "40 m²", next to each line in a full breakdown.

Download the PDF

  1. Tap Download PDF. It shows Building… for a moment.
  2. The PDF saves to your downloads, named after the job, for example JT-2418-proposal.pdf.

On an iPhone or iPad the PDF opens in a new tab instead. Use the share button there to save or send it.

The PDF is A4. It has the same wording, prices and closing box as the screen. Your terms and conditions, if you have them, are on a page of their own at the end.

Send it to the customer

There are two ways. Either way, the quote moves to Sent.

Send it yourself

  1. Download the PDF.
  2. Send it to the customer however you normally would: email, WhatsApp, or print it.
  3. Back in QuoteSite, tap Mark as sent.

The button changes to Sent ✓, and a Sent label shows in the top bar. Once the customer has accepted, or you've marked the quote lost, Mark as sent no longer shows.

If Download PDF or Mark as sent doesn't work, a message under the top bar says so. Try again; if it keeps happening, refresh the page.

Email it from QuoteSite

This is optional. If you don't see Email to customer and want it, ask us to switch it on.

  1. Tap Email to customer.
  2. Check the address in Send to. It fills in from the client's email.
  3. Tap Send email. It shows Sending….
  4. You'll see Proposal sent, with the address it went to and the address it came from.
  5. Tap Done.

If the client has no email, type one in. The message No email on the client record reminds you it won't be saved to the client. To save it, add it on the client's page.

To send it again, for example after a change, tap Email again.

What the customer receives

The email's subject is "Your proposal from", your business name and the job reference.

The proposal is in the body of the email, not attached as a PDF. It has the same wording, prices and terms as on screen. It ends with an invitation to reply to the email, or call your phone number, to go ahead.

When the customer replies, it normally goes to the business email in Settings.

After sending

When the customer decides, open the quote and use Mark as accepted or Mark as lost on the Job lifecycle card. See Won, lost and done.